Mold Coolant 90 Degree Elbow Brass Hexagonal Quick Release Connectors

         Product Introduction 

DME standard brass 90 degree connectors, elbow type, , there are three sizes, which are  N9 N13  series,which indicates different connector outer diameter.

As for pipe thread,there are 1/8 1/4 BSPT.

         Product Advantage

1. DME standard brass angle nipples can withstand temperatures of around 200°C.

   2.The male hex nipple  must be the same size as the female quick coupling

   3.The male brass nipple is generally open, but the brass quick coupler can be connected at the same time open           flow or with valve

  4.This brass connector is mainly used for water or oil flow.

  

        Technical Parameters

 

        

         Product Uses

The water couplings of molds are primarily utilized within the cooling water systems of injection molding or die-casting molds，It serves to heat or cool the water circulation.It can quickly improve the thermal exchange of molds, with short cycle time and good stability.

         Product Operate Guid

quick coupling can be used interchangeably with the same brass nipple plugs already in your mold or die, comparable size of both type quick coupler have the same O.D., permitting interchangeability even when the hex nipple plugs are flush mounted

        FAQ

1. What type of brass male quick coupling is usually chosen for a  with valved female quick coupling？  reply:  Both open and closed male nipple can be used, but if you use a closed male water coupling, then you can only used with the shut off quick  connector.