American Standard Brass Quick Coupler With Angle 90 Hose Tail

Product Introduction

DME standard angle 90 mold brass quick coupler, which are 200series, 300 series and 500 series; hose barb sizes usuallly include 3/8" and 1/2", It can be divided into open and closed types from a functional perspective.

Product Advantage

1. Mould brass quick coupler Using viton seals, It can withstand temperatures of around 200°C.  

2. This quick connect coupler conforms to American standards, and there is absolutely no water leakage.

3. The brass quick disconnect coupler are simple and convenient to use, and the male nipple plug and female quick release coupler can be plugged in and unplugged at any time.

4. Quick connectors are mainly used for water or oil flow.

5. This quick coupling is ideal for frequent disassembly and replacement of cooling circuits and molds.

   
   

Technical Parameters

Product Uses

The water quick coupling are mainly used for installing or removing the cooling circuit of injection molding machine or die casting machine molds, mainly used for heating or cooling systems, which enhance the flow performance。

Product Operate Guide

The way to use a quick fitting: 1.two way shut off: with valve male coupling  with shut off female coupling; 2. one way shut off:  no vavle brass male plug with shut off female quick fitting.

FAQ

1. What is the main function of a closed quick coupling？  

2. Reply: The main function of a closed quick connect coupling is to automatically seal the water and prevent it from flowing out of the water pipe and contaminating the workshop after the water nipple plug is removed. However, its disadvantage is that it has strict requirements for water quality. If there are too many impurities, the fitting will be blocked, affecting the water flow