American Standard Straight Mould Quick Coupling With Hose Tail

Product Introduction

DME standard quick coupling, the shape is straight, Generally, there are three sizes, which are 200 series, 300 series and 500 series; hose barb generally has several specifications, such as: 1/4,5/16, 3/8,1/2; From a functional perspective, it is classified into two categories: open and closed.The feature of closed-type valves is that they can automatically seal water.

Product Advantage

1. DME standard quick coupling Using viton seals, Therefore, this type of female quick connector coupling can withstand temperatures of around 200°C.  

2. The dimensions of the quick conncet fitting are stable and compliant with international brand standards, and there is absolutely no water leakage.

3. The brass quick connectors are simple and convenient to use, and the male and female quick connect

4. Coupling can be plugged in and unplugged at any time.

5. This brass quick coupling is mainly used for water or oil flow.

Technical Parameters

Product Uses

The water couplings of molds are primarily utilized within the cooling water systems of injection molding or die-casting molds, It serves to heat or cool the water circulation. It can quickly improve the thermal exchange of molds, with short cycle time and good stability.

Product Operate Guide

The way to use a quick fitting: 

1.two way shut off: with valve male coupling  with shut off female coupling; 

2. one way shut off: no vavle brass male plug with shut off female quick fitting.

FAQ

1. What type of brass male quick coupling is usually chosen for a  with valved female quick coupling？  

2. Reply:  Both open and closed male nipple can be used, but if you use a closed male water coupling, then you can only used with the shut off quick  connector.