American Standard Mould Water Quick Coupling for With Push Lock

Product Introduction

DME standard brass quick coupling elbow, which are 200series, 300 series and 500 series; this water quick coupling with push lock hose barb,and it has a yellow ring as a mark. the hose barb size usuallly include 3/8" and 1/2", It can be divided into open and closed types from a functional perspective.

Product Advantage

1. The quick release coupling seal ring is usually made of viton, which can withstand high temperatures and work with oil medium without any problems.  

2. the DME standard sockets have a large thru hole to provide unrestricted flow,these quick connection couplers are available with either straight ,45 or 90 hose stems, or standard female or male npt threads.

3. The mould water quick couplings are generally used in low-pressure environments, with a maximum pressure of no more than 200 PSI.

4. dme standard quick release coupling open automatically when connected and shut off automatically when disconnected.  unlike most valve-type connectors, sockets are designed to keep flow restriction to a minmum

Technical Parameters

Product Uses

Quick  disconnector couplings are designed for use with plastic molds and die-cast dies in water, air or oil lines.

Product Operate Guide

The way to use a quick fitting: 

1. Two way shut off: with valve male coupling  with shut off female coupling;

2. One way shut off:  no vavle brass male plug with shut off female quick fitting.

   
   

FAQ

1. Are different international standards interchangeable?  

2. Reply: no, different international standard male and female connectors cannot be interchanged for use. For example, a female quick coupling with an American standard can only be used with a corresponding American standard male quick coupling, and cannot be compatible with European standard or other standard male connectors