close
Choose Your Site
Global
Social Media
Product Introduction
Hasco standard brass coolant hose fittings, with both ends connected to female quick couplers for use, the water male brass nipple ends can be the same or different, depending on customer requirements. The size of the water male hex nipple head is usually one of three sizes, 9mm, 13mm, and 19mm.
Product Advantage
This brass quick connector is mainly used for water or oil flow, and is not suitable for gas.
This quick coupling is suitable for frequent disassembly and replacement of cooling circuits and molds.
Improve the dimensional accuracy of formed products, maintain the stability of physical properties, and shorten the forming cycle.
Copper male nipple are connected to female nipples and can be easily plugged and unplugged for convenient operation.
Technical Parameters
| Type | p(bar) | l3 | l2 | l1 | d3 | d2 | d1 | d4 | Item number |
| 1 | 25 | 10 | 10 | 22 | 2.7 | 2.7 | 5 | 5 | Z830/5*5 |
| 2 | 25 | 14 | 10 | 26.5 | 6 | 2.7 | 5 | 9 | Z830/5*9 |
| 1 | 25 | 14 | 14 | 30.5 | 6 | 6 | 9 | 9 | Z830/9*9 |
| 2 | 25 | 14 | 14 | 31 | 9 | 6 | 9 | 13 | Z830/9*13 |
| 1 | 25 | 14 | 14 | 31 | 9 | 9 | 13 | 13 | Z830/13*13 |
| 2 | 25 | 27 | 14 | 46 | 13 | 9 | 13 | 19 | Z830/13*19 |
| 1 | 25 | 27 | 27 | 59 | 13 | 13 | 19 | 19 | Z830/19*19 |
Product Uses
The water quick couplings of molds are primarily utilized within the cooling water systems of injection molding or die-casting molds，It serves to heat or cool the water circulation.It can quickly improve the thermal exchange of molds, with short cycle time and good stability.
Product Operate Guide
Adapt to connectors of the same size as the head, and both ends have the same connection method. Choose according to your machine flow and size requirements.
