European Standard Hydraulic Quick Couplings For Ejection Mold

Product Introduction

hasco standard water quick coupling, the shape is straight, according to the port size, the quick coupler types are divided into three sizes: 1/4 inch, 3/8 inch, and 1/2 inch.; The size of the hose barb is usually divided into 1/4, 5/16, 3/8, and 1/2 inches based on the inner diameter of the water pipe.From a functional perspective, quick release coupling can be divided into two types: one with a valve and the other without a valve.

Product Advantage

1. A mold quick-release fitting with fluorine rubber seals can withstand temperatures up to approximately 200°C;  

2. This brass quick coupling design makes it very convenient to use and can be operated with one hand.and the male and female quick coupling can be plugged in and unplugged at any time,

3. This brass quick coupling is mainly used for water or oil flow, and is not suitable for gas.  

4. The dimensions of the quick release coupling are stable and compliant with international brand standards, and male and female quick coupler that fit together perfectly without leaking.

   
   

Technical Parameters

Product Uses

The mould quick coupling are mainly used in the injection molding industry water cooling system for cooling and heating circuits.

Product Operate Guide

the way to use a quick fitting: 1.two way shut off: with valve male coupling  with shut off female coupling; 2. one way shut off:  no vavle brass male plug with shut off female quick fitting.

FAQ

1. what type of brass male quick coupling is usually chosen for a  with valved female quick coupling？

2.  reply: Both open and closed male nipple can be used, but if you use a closed male water coupling, then you can only used with the shut off quick  connector.