European Standard Water Quick Connector With Hose Barb

Product Introduction

HASCO standard 90-degree mold quick couplings have two types of manufacturing methods at the 90-degree connection point. One is threaded, where the tube style can be customized according to customer needs. The other is injection molded as a single unit, but the tube style is limited to one option. These quick couplers are typically divided into two categories: those with valves and those without valves.

Product Advantage

1. HASCO standard quick connect couplings use Viton seals, allowing the quick release couplings to operate at temperatures up to approximately 200°C..  

2. The shell of an open flow quick connector is usually coated with copper to differentiate it from a closed-ended quick fitting ,additionally, the shell can be integrated with safety valve technology to prevent sudden disconnection under pressure connection.

3. The water quick release coupling are often used to convey water or oil, among other media.  

4. The mold cooling quick coupling female design is used to quickly and easily connect and disconnect the cooling system during mold changes.

   
   

Technical Parameters

Product Uses

The female mould quick connector fitting of molds are primarily utilized within the cooling water systems of injection molding or die-casting molds, cooling and heating circuits,which enhance the flow performance.

Product Operate Guide

The way to use a quick fitting: 

1. Two way shut off: with valve male coupling  with shut off female coupling;

2. One way shut off:  no vavle brass male plug with shut off female quick fitting.

   
   

FAQ

1. what type of brass male quick coupling is usually chosen for a  with valved female quick coupling？  

2. Reply:  Both open and closed male nipple can be used, but if you use a closed male water coupling, then you can only used with the shut off quick  connector.