European Standard High Flow Brass Quick Disconnect Coupler For Water

Product Introduction

HASCO standard 45 degree water quick couplings comes in three sizes based on the size of the hole, namely 1/4, 3/8, and 1/2, and in two types based on function, one is shut off  and the other is open flow, The design of the water quick connect coupling is different from the American standard and uses an oblique pyramid structure.

Product Advantage

1. Brass mould quick release coupling is sealed with a stable O-ring made of fluorine rubber, which can withstand temperatures up to approximately 200°C.  

2. quick connect coupling have two style, one is open flow, the other one is shut off, usually the open flow coupling shell is coated with copper

3. When the quick connector is disconnected, the closed hydraulic quick connect coupling can automatically seal the water, preventing water from flowing out of the hose and affecting the workshop environment.  

4. The quick connector must be used with the male connector of the corresponding size
   

   
   

Technical Parameters

Product Uses

The water quick couplings of molds are primarily utilized within the cooling water systems of injection molding or die-casting molds, It serves to heat or cool the water circulation.It can quickly improve the thermal exchange of molds, with short cycle time and good stability

Product Operate Guide

European standard quick couplings are easy to use and automatic

FAQ

1. what type of brass male quick coupling is usually chosen for a with valved female quick coupling？  

2. Reply: Both open and closed male nipple can be used, but if you use a closed male water coupling, then you can only used with the shut off quick  connector.