close
Choose Your Site
Global
Social Media
Product Introduction
Misumi standard male quick coupling, the shape is straight, The threads on quick connect fittings usually come in two sizes: 1/4 PT and 3/8 PT; This type of joint is usually closed more often than not; This quick connector can be interchanged with Japanese standard quick fittings
Product Advantage
The connection between plugs and sleeves is not affected by size or installation shape and is interchangeable
This quick connector can effectively adjust the mold temperature, thereby shortening the molding cycle of plastic molds;
Standardized products come in a variety of sizes and installation shapes, making them widely applicable to various molds;
This type of quick connect coupling is very easy to install, saving time and effort, and is also easy to maintain and manage later on;
Quick coupler are mainly made of copper and contain sealing rings and steel balls inside. The sealing ring is a fluoroelastomer ring that is highly durable and does not cause leaks
Technical Parameters
Product Uses
The water quick coupling is mainly used for the cooling water system of injection molding or die casting molds, mainly for water circulation systems, which can quickly heat up or cool down the mold and have good stability. The upper and lower molds are convenient and fast, which shortens the molding cycle and improves production efficiency.
Product Operate Guide
the way to use a quick fitting:
two way shut off: with valve male coupling with shut off female coupling;
one way shut off: no vavle brass male plug with shut off female quick fitting; When you connect to the hose, please use the hose and clamp that fit the outer connector.
FAQ
What should be noted when installing and using cooling water quick fittings?
reply: 1. Tighten within the range of maximum torque below;
2. Use within the applicable temperature range;
3. Do not use in any application other than cooling water;
4. Use suitable hose and clamp when connecting to a hose.
