Japanese Standard High Quality Brass Quick connector With Hose Barb

Product Introduction

This quick fitting is usually used to connect hoses. The outside diameter of the tubing insert has two specifications: 8mm and 12mm;The outside diameter of the coupling is 18.5 inches.

Product Advantage

1. The outer diameter of the copper sleeve should not exceed 18.5mm, which can be used for compact molds.;

2. The collar of this quick connector is longer, so it can be pulled out even when the quick coupling is inside the mold.;

3. This water brass coupling can be quickly connected and disconnected from the cooling water hose of the mold;  

   
   

   
   

Technical Parameters

Product Uses

The quick coupling for molds is mainly used for the cooling water system of injection molds or die casting molds, shortening the mold water circulation cycle and improving stability.