French Standard Water Quick Connect Coupling With Push Lock

Product Introduction

Staubli standard straight quick fitting, The main size of this quick coupling is usually divided into three series: RPL06 series, RPL08 series, and RPL12 series; the mould quick connector with push lock hose barb, and it has a yellow ring as a mark. the hose barb size usuallly include 6mm, 8mm, 10mm, 13mm, 16mm, based on the inner diameter of the water pipe; Staubli quick coupling are often designed with an open style.

Product Advantage

1. This quick connector is made of copper and processed, but its entire body has been electroplated, so not only does it look beautiful, but it is also durable and cost-effective ;  

2. This quick couplings uses an open design, which increases the flow rate and also relaxes the water quality requirements for mold use, effectively preventing blockages caused by dirt and ensuring smooth water flow;

3. The shell of the quick connect coupling is designed with rolling, which increases the friction force, allowing the female quick coupling and male quick coupling to easily fit together and achieve one-handed quick insertion and removal;

4. This quick release coupling simplifies the installation of molds and makes it easier, and the quick fitting design is simple, making it easier to replace seals, making the quick connector easy to maintain and saving time to improve production efficiency;

5. This straight water quick release coupling with a push-lock hose barb, which increases resistance and has a slightly larger diameter than standard hose barb, so it can be connected to hoses without using clamp.
   

   
   

Technical Parameters

Product Uses

This French standard quick couplings is mainly used for injection molding and die casting, mainly for controlling the water system of plastic molds. It can shorten the water circulation time and make the mold have good stability.

Product Operate Guide

This quick connector has an open design, allowing the user to insert the male connector into the female connector with one hand. To disconnect, simply pull back the female connector housing. The receptacle is usually marked with color rings for quick and easy identification of the circuit.

FAQ

1. what type of brass male quick coupling is usually chosen for a  with valved female quick coupling？

2.  reply:  Both open and closed male nipple can be used, but if you use a closed male water coupling, then you can only used with the shut off quick  connector.