French Standard Straight Brass Mould Quick Couling For Hose

Product Introduction

This series of quick couplings has a nominal size of 8 or 12 mm, and the other end is a barrel-type plug, which is usually open.

Product Advantage

1. This quick-release coupling is made of brass and plated with copper;  

2. This quick-connect open-through design features a large water flow and unobstructed fluid flow;

3. The sealing material for the quick coupling is a fluorine rubber ring, with a valve-free design. The medium is mainly water, with a maximum pressure of 290 PSI and a maximum operating temperature of 200°;

4. The import and export places of the quick coupler can be marked with a color-coding system. The disconnect system of this series of quick couplers is designed to be simple and easy to operate;

   
   

   
   

Technical Parameters

Product Uses

The water quick couplings of molds are primarily utilized within the cooling water systems of injection molding or die-casting molds, It serves to heat or cool the water circulation.It can quickly improve the thermal exchange of molds, with short cycle time and good stability

Product Operate Guide

This quick connector has an open design, allowing the user to insert the male connector into the female connector with one hand. To disconnect, simply pull back the female connector housing. The receptacle is usually marked with color rings for quick and easy identification of the circuit.

FAQ

1. what type of brass male quick coupling is usually chosen for a  with valved female quick coupling？  reply:  Both open and closed male nipple can be used, but if you use a closed male water coupling, then you can only used with the shut off quick  connector.