French Standard Quit Joint For Water Coolling System

Product Introduction

Staubli standard Angle 90 quick coupling,The RPL quick fitting provides three different sizes of orifice dimensions, namely the PRL06 series, RPL08 series, and RPL12 series, which can be used to control the desired flow rate.Staubli quick connector are often designed with an open style.

Product Advantage

1. This quick coupling temperature range is -20°C to +100°C, and the working pressure can reach 10 bar;

2. This type of quick connector is usually made of brass and plated with a metal, and it typically has an open design;

3. These quick fittings are mainly used in temperature regulation, such as using hot water, cold water, oil, and the plastics industry and steam pipelines;

4. This quick  fitting makes it easy to install the mold. For new molds, a fully embedded installation method is used, which is convenient for storing molds and effectively avoids the risk of damaging the socket. For old molds, a micro-protruding installation method is used.

5. These quick joint are easy to maintain, and the replacement process for the seal ring is quick and simple, saving time effectively and not affecting production progress.
   

   
   

Technical Parameters

Product Uses

The water quick couplings of molds are primarily utilized within the cooling water systems of injection molding or die-casting molds, It serves to heat or cool the water circulation. It can quickly improve the thermal exchange of molds, with short cycle time and good stability

Product Operate Guide

This quick connector has an open design, allowing the user to insert the male connector into the female connector with one hand. To disconnect, simply pull back the female connector housing. The receptacle is usually marked with color rings for quick and easy identification of the circuit.

FAQ

1. what type of brass male quick coupling is usually chosen for a  with valved female quick coupling？

    reply:  Both open and closed male nipple can be used, but if you use a closed male water coupling, then you can only used with the shut off quick  connector.