French Standard Female Quick Fitting For Injection Mould

Product Introduction

Staubli standard straight female quick coupling, but not hose barb, this kind of brass water coupling is connect with thread,Generally, the female thread is 1/8G,1/4G,3/8G; The main size of this quick fitting is usually divided into three series: RPL06 series, RPL08 series, and RPL12 series;  

Product Advantage

1. This quick coupling is Made of copper and electroplated, it has a long service life and can withstand up to 10 bar pressure;

2. This type of quick fitting is usually designed with an open structure, which greatly increases water flow. The usual temperature range is -15°C to 90°C.;

3. This quick connector uses an internal thread connection and can serve as a conversion device;  

4.  These quick connect couplings are usually just damaged seals, and this design makes it easy to replace the seals quickly;  

   
   

Technical Parameters

Product Uses

It is mainly used in injection molding machines or die casting machines that have temperature control requirements, especially in the cold and hot fluid aspects. It can quickly improve the heat exchange efficiency of the mold and shorten the cycle time, with good stability. Moreover, the nickel-plated brass connector has better corrosion resistance and aesthetics.

Product Operate Guide

This quick connector features an open design, making it easy to connect and disconnect the male and female quick couplings. There are usually three types of specifications for this quick fitting, including the RPL06 series, RPL08 series, and RPL12 series. The male and female quick connectors must be of the same type to be compatible.

FAQ

1. what type of brass male quick coupling is usually chosen for a  with valved female quick coupling？  

   reply:  Both open and closed male nipple can be used, but if you use a closed male water coupling, then you can only used with the shut off quick  connector.
   

2.