Home » Products » Brass Fitting » Straight Hose Nipple Connector Brass Fitting With Hose Tail

Straight Hose Nipple Connector Brass Fitting With Hose Tail

Product Description

Product Introduction	Traditional brass fitting one side is thread, other side is hose barb, the hose barb sizes usuallly include1/4,5/16, 3/8",1/2"and 3/4 ,Brass flexible hose barb fittings are used for general fluid handling and pneumatic systems and are a very economical choice.
Product Advantage	The brass fitting are reusable and have good vibration resistance. This series of brass hose fittings must be used with clamps; The hose fitting brass are currently available in both imperial and metric sizes, and thread types include NPT, BSPT, and metric thread; This brass hose barb fitting reduces system pollution caused by corrosion.
Technical Parameters
Product Uses	Brass flexible hose barb fittings are typically used as an economical option for fluid handling and pneumatic systems.
Product Operate Guide	The end of the hose barb joint is connected to the corresponding thread of the pipe, and the other end is connected to the corresponding soft pipe. It must be locked with a clamp.
Product Video
FAQ	What should be noted when installing and using cooling water quick fittings? reply: 1.Tighten within the range of maximum torque below; 2.Use within the applicable temperature range; 3.Do not use in any application other than cooling water; 4.Use suitable hose and clamp when connecting to a hose.